Epoxy Putty Repair Sticks - Underwater

HAND MIX & APPLY: JENOLITE Epoxy Putty Sticks are a range of two part epoxy putty sticks that can be used to rebuild and repair. MULTI-SURFACE APPLICATIONS: For use on metal, steel, aluminium, copper, titanium, plastic, fibreglass, ceramics, etc. WEATHER PROOF & RESISTANT TO CORROSION: Suitable for interior and exterior use and resistant to water, chemicals and temperature extremes. FAST ACTING: Ready to use in minutes, typically fully functional in 60 minutes (review technical data sheet for exact timings). DURABLE: The easy to use sticks can be hand mixed to create a polymer compound that can be moulded, wrapped or used to join components or build up and repair just about anything. Once fully cured it is completely waterproof and can be sanded, sawn, drilled and painted over. Easy to mould to join, rebuild and repair most surfaces. PLASTIC EPOXY PUTTY: Plastic Epoxy Putty Stick is a two component epoxy stick, that can be used to repair and rebuild most plastics. The hand-mixable, fast-setting epoxy resin putty forms a durable bond to most major plastic types. After mixing it creates a polymer compound that can be moulded, wrapped around, or used to build up and repair just about anything made from rigid or semi-flexible plastic. TITANIUM EPOXY PUTTY: A non-rusting, titanium reinforced epoxy resin putty that quickly repairs or rebuilds anything made of metal. Ideal for repairing cracked, snapped and holed metal, it offers an industrial strength solution. Suitable for high temperature use – up to 260°C. Functional after 60 mins, once fully cured it is completely waterproof and can be drilled, tapped, machined, ground, filed and even painted. ALUMINIUM EPOXY PUTTY: A non-rusting, aluminium reinforced epoxy putty. This putty quickly repairs or rebuilds anything made of metal. The two part epoxy resin can be mixed by hand and applied directly to the area that needs repairing or rebuilding. Ideal for repairing scratched, chipped and cracked metal. Once fully cured the putty can be drilled, tapped, machined, ground, filed and even painted. Easy to use, and essential for any mechanic's store cupboard! STEEL EPOXY PUTTY: A non-rusting, steel reinforced epoxy putty that quickly repairs or rebuilds anything made of metal. The two part epoxy resin can be mixed by hand and applied directly to the area that needs repairing or rebuilding. Ideal for repairing scratched, chipped and cracked metal. It offers an industrial strength solution that can withstand temperatures up to 149°C. Functional after 60 mins, once fully cured it is completely waterproof and can be drilled, tapped, machined, ground, filed and even painted. COPPER EPOXY PUTTY: A two component epoxy resin stick, that can be used to repair pipes, tanks, hot pipes and vessels made of brass, copper, bronze and other non ferrous metals. Ideal for plumbing elbows, sink taps and water heaters. Will also seal freeze breaks in pipework. The hand-mixable, fast-setting epoxy putty forms a durable bond that after mixing creates a polymer compound that can be moulded to fit. Once fully cured it is completely waterproof and can be sanded and painted over. Ideal for plumbing emergencies such as repairing leaking hot lines. Perfect for pipe repair and plumbing applications, JENOLITE's Copper Epoxy Putty Stick is the essential plumber's epoxy. Applications include plumbing elbows, sinks, taps, and water heaters. It can be used on brass, copper, bronze, and other non-ferrous metals. UNDERWATER EPOXY PUTTY: Hand-mixable, specialty epoxy putty for repairs to damp, wet areas and underwater surfaces. After mixing, the epoxy resin forms a polymer compound that may be applied underwater (either fresh or salt water) and will bond tenaciously to substrates such as fibreglass, concrete. Ideal for marine repairs and repairs to damp, wet and underwater surfaces, such as holes, cracks, leaks and gouges in decks and hulls, swimming pools, hot tubs, spas, recreational equipment, as well as leaking tanks and gutters. Full functional after 60 mins, once fully cured it is completely waterproof and can be drilled, tapped, machined, ground, filed and even painted. MADE IN BRITAIN