StickTite Stick On Magnifying Lenses For Diving Masks - +2

StickTite Stick On Magnifying Lenses For Diving Masks StickTite Stick On Magnifying Lenses For Diving Masks. A Great Solution to a really common issue divers have, especially as they get a bit older....... Difficulty reading their computer or gauges! This can obviously become a safety issue if you are essentially guessing at how much air you have or your dive time. StickTite, previously Hydrotac, lenses offer an economical, simple solution. The lenses stick to the inside of your mask or even swimming goggles. Simply soak them in warm water for a minute or so and then they bond to the lens, simple! StickTite lenses can be trimmed to fit your mask or goggles with sharp scissors. They can also be removed and reused on different masks or goggles if needed. Once they are fitted properly they don't come off when immersed in water when rinsing your kit after a dive for example. The lenses come in various positive diopter increments and are sold as a left and right pair. A simple, cost effective solution to underwater vision issues. Ideal for all activities including diving, swimming, skiing cycling etc StickTite Stick On Lenses For Diving Masks - Features REMOVABLE hydro-adhesive bifocal presbyopia lenses for diving masks, ordinary glasses, ski goggles and sports glasses. FROM CLASSIC TO BIFOCAL EYEWEAR - turn your dive mask into a bifocal mask with presbyopic hydro-adhesive lenses. NEW ADHESION TECHNOLOGY - StickTite's instant hydro-adhesive bifocal lenses adhere perfectly to your mask, even under water. As there are no glues or adhesives, you can move them to another mask whenever you want. EASY APPLICATION - In a few moments, your mask will become a bifocal diving mask. To apply the lenses, simply remove them from the packaging, place a drop of water on the lens of the glasses and apply them directly to the inside of the mask. FOR EVERY OCCASION - If you are a sporty type and want to turn your sunglasses into graduated sports glasses StickTite is the solution! Perfect for sunglasses, diving masks, Motocross goggles or cycling goggles - in short, suitable for any outdoor activity! DIOPTERS AND DIMENSIONS- To ensure correct vision, StickTite have developed their hydro-adhesive presbyopic lenses in 6 different diopters. Available from a minimum of +1.25 to a maximum of +3.00. The bifocals are semi-circular in shape and measure 28 mm by 14 mm. QUALITY - Sticktite hydro-adhesive lenses have all CE certifications guaranteeing their quality and the hydro-adhesive lens material is patented. TEST LENSES - If you're on the fence about buying an expensive bifocal mask, try StickTite to see if it's right for you. WHAT DO I GET? - You will receive innovative packaging for the safety and protection of the lenses themselves. Inside you will find a pair of lenses and fitting instructions. How To Fit StickTite Lenses Correct fitting and positioning are important to get the most out of Sticktite lenses. Fitting is simple, you just need a little patience and perseverance. Follow the instructions and you'll be done in five minutes! Wash your hands Wash your hands with soap to avoid leaving fingerprints. Clean the lens of your goggles or mask thoroughly before application Before fitting the lenses clean the glasses, or the mask, with a lens cleaning solution or a microfibre cloth to remove dust and fingerprints. Place a drop of water on the lens of the glasses or mask Apply a few drops of water to the lenses of your mask. Wetting the lenses allows you to slide and adjust the positioning of StickTite. Attach lenses to mask Place the Sticktite on the drop of water, in the position shown in the picture (horizontal, on the bottom of the lens or on more than one drop of water). If bubbles form, press with your thumb and move the StickTite lens in a small circular motion until all bubbles are removed. Now the wet Sticktite can be moved to the desired area The lenses should be positioned close to the nose, centred directly under the pupils. Adjust and try the lenses as needed by sliding them with your thumb. Once the desired position is reached, use a soft cloth to lightly press the Sticktite lens to remove excess water. Wait 15 minutes for the lenses to dry completely and adhere to the glasses. Remove excess water Then, with a soft, lint-free cloth, lightly press the stick to remove excess water. Wait 15 minutes for the lenses to dry completely and adhere to the glasses. Repeat the same procedure with the second Sticktite