Watch Band Bracelet Block With Pin Adjusters

Ideal for removing bracelet links Included two shortening punches in 0.8 and 1.0mm Three spare pins in each size Made from plastic and stainless steel Designed for professional and aspiring watchmakers This watch block adjusting kit includes a bracelet holding block with adjustable slots, designed to securely hold the bracelet while you remove or adjust the links.This helps ensure the watch bracelet stays in place as you work on it. This kit includes: 0.8mm punching pin 1.0mm punching pin Holding blocks with various slot widths Three spare pins in each size How to use it step by step: Choose the correct slot width in the bracelet holding block, the links of the bracelet should be secured in the slot for the pin removal process. Select the correct pin but make sure the arrows on the inside of the bracelet are pointing in the right direction. Make sure the pin is aligned with the pin pusher on the tool. Use the pin pusher to press the pin out of the bracelet, if the pin is stuck gently tap the tool with a small hammer like (999 6825) Once the pin is out, the link can be removed and the bracelet can be aligned to re-insert the pin by using a pin pusher. Please note that a hammer must be bought separately for use with this kit.