Split Mandrel Parallel For Paper

Used with abrasive paper of your choice Mounted on a 2.34mm shank For use with a pendant motor or hobby drill Mounted on a 2.34mm (3/32) shank and used in conjunction with the pendant motor, micromotor and hobbydrill. The parallel Split Mandrel is used with Emery Paper, Wet & Dry. The end of a strip of appropriate grade paper is threaded into the slit. The remainder of the strip is wound around the mandrel. When winding, note should be taken in which direction the mandrel will turn. If wound incorrectly the paper will unravel as the mandrel turns. If wound correctly the motion of turn against the object will keep the paper tight on the mandrel. Once the `outside` turn of paper is worn, this can be removed to reveal `fresh` paper. Tapered Split Mandrel also available (999 CBJ). Other 3/32 mounted mandrels available : Screw Thread Mandrel 999 AES (for rubber cylinders) Screw in Top Mandrel 999 AET (for rubber wheels) Pin Vice 999 FAU (with 3 collets).