Aqua-Quip QC Series 1 x Multi-Colour LED Retro-Fit Pool Light w/ Concrete Universal Mount Bracket and Plug Kit

QC LED Surface Mounted Pool Lights for Existing Pools The Aqua-Quip QC LED Multi-Colour Retro-Fit Concrete Underwater Pool Light is a state-of-the-art lighting solution designed for both new and existing concrete pools. Featuring brilliant LED colours, the QC Series offers a multi-colour options with Aqua-Quip’s unique Colour Selection Palette for nearly limitless colour possibilities. These lights are energy-efficient, utilizing only 15% of the power required by traditional halogen lights, and feature advanced thermal management for optimal performance and reliability. With a variable voltage technology that ranges from 12V AC to 32V AC, a quick connect feature for easy installation, and a universal mounting bracket, the QC Series lights are versatile and user-friendly. Benefits: Vibrant LED Colours: Offers multi-colour options with a wide range of pre-programmed modes. Energy Efficiency: Consumes only 15% of the power needed for traditional halogen lights. Ease of Installation: Quick connect feature simplifies installation into existing pools. Versatile Voltage Range: Operates with supply voltages from 12V AC to 32V AC. Enhanced Brightness: Significantly brighter than older 100w halogen systems. Universal Mounting: Compatible with various brands of pool lights for retro-fit applications. Features: LED Colour Options: Available in multi-colour options with an extensive Colour Selection Palette. Energy Efficient: Utilizes only 15% of the power required by halogen lights, with maximum power consumption of 22VA. Variable Voltage Technology: Operates from 12V AC to 32V AC, compatible with existing transformers. Quick Connect Feature: QC Retro-Fit LED Lights are supplied with the unique waterproof Quick Connect Plug Kit and a universal mounting bracket – allowing replacement of all other brands of surface mounted lights in concrete pools. Step 1. Fit the plug kit to the existing cable. Step 2. Push into rear of light and tighten screws. Universal Mounting Bracket: Facilitates retro-fit installations and new pool applications with multiple screw provisions. Protection and Reliability: Features power cycle “Run Dry” thermal cut-out and voltage transient clamping for fault protection. High Light Colour: White >5,000K, Blue 475nm, Green 525nm. Replaceable accessories Aqua-Quip QC Retro-Fit Lights replace the following brands of Surface Mounted Lights: Stroud C150 (Diameter 210mm) Poolrite (Diameter 232mm) Varimode (Diameter 211mm) Waterco (Diameter 220mm) Waterco Britestream MKIV (Diameter 220mm) Waterco Britestream MKV (Diameter 240mm) Swimworld (Diameter 250mm) Stroud SM400 (Diameter 250mm)* Filtrite (Diameter 250mm)* Sunline/Rivendale (Diameter 230mm) Spa Electrics SE3M (Diameter 235mm) PAL RCS (Diameter 220mm) Spa Electrics (Diameter 200mm) Autumn Solar Slim 180 (Diameter 220mm) Emaux E-Lumen (Diameter 261mm) Magic Pool Products (Diameter 236mm) Aqua-Quip Halogen (Diameter 230mm) Zodiac Lumipower SM (Diameter 196mm) (*) Additional APL 075 - Locating Bar Assembly required Technical Specifications: Available Colours Multi Colour Quattro Quad Blue White Controller Compatibility Wall Switch or Power Point Aqua-Quip InstaTouch Astral Connect 10 / Connect Lite / HALO* Zodiac Jandy AquaLink* Hayward OmniLogic* Pentair IntelliTouch, EasyTouch, IntelliCenter* INSNRG Aquatek (by Dontek Electronics) Theralux Active Pool+Manager Aquamate X Sunlover Oasis Smart Control System SplashMe Automation Controller Home Automation Systems (C-Bus etc)* Rim Colour Options White (standard) / Metallic Grey Dimming Available when used with Aqua-Quip InstaTouch Smart Lighting Controller Power Requirement 12V ~ 32V AC 50/60Hz Protection Rating IPX8 up to 2.0m depth Temperature Range 0°C ~ +40°C pool water temperature Installation Location 200mm ~ 400mm below water level Power Consumption Maximum 22VA at all Voltages 12V ~ 32V Voltage Tolerance 10.5V AC ~ 35V AC Light Colour White >5,000K, Blue 475nm, Green 525nm Light Output (Typical) White = 1050 Lumens, Blue = 300 Lumens, Green = 650 Lumens Fault Protection Power cycle “Run Dry” thermal cut-out and voltage transient clamping (*) Important: To ensure proper operation, the lights must be programmed to match the specific controller's color-changing protocol. If you're unsure about compatibility or need assistance, click here for help choosing the best suitable lights for your pool. In The Box: 1 x QC Multi-Colour Retro-Fit LED Light P/N LED024Twhich is factory sealed and supplied with a clear lens with proprietary diffusion material ensures the vivid colours of the LEDs are projected and evenly dispersed throughout the pool. 1 x Universal Mounting Bracket P/N APL050which has a variety of screw holes to ensure compatibility with all brands. 1 x Quick Connect Plug Kit P/N LED375allowing the light to be connected to the existing cable; colour coded cable seals of varying sizes enable the light to be connected to cables of varying thicknesses. 1 x Design Ring - White P/N LED151 or Metallic Grey