Noble LED cabinet with colour change under lights and Bluetooth audio

Not to be confused with low power, low quality audio systems fitted to other products. The Bluetooth audio option available on a wide range of our bathroom cabinets produces a high quality stereo sound from an impressive 20Wrms per channel amplification system. Pair your mobile device easily using Bluetooth 3.0+EDR, or connect directly to the system using a 3.5mm jack plug. For the audiophiles, the full technical specification of the Bluetooth option is Bluetooth Specification Bluetooth 3.0+EDR compliant Typical +2dBm Class 2 output power Receiver Sensitivity: GFSK typical -90dBm, Amplifier Specification 0.03% THD+N @10W 4ohm 0.1% THD+N@12W 4ohm 0.18% IHF+IM@1W 4ohm High power 25W@4 ohm,10% THD+N Vdd=14.6V 22W@4 ohm,10% THD+N Vdd=13.5V 13W@8ohm ,10% THD+ N Vdd+13.5V Class-T architecture High efficiency 88% @12W 8ohm 81% @ 20W 4ohm Dynamic range=99dB Over-current protection Over-temperature protection Speaker Specification Frequency Response: 105Hz - 18KHz SPL 82db, Qts: 1.31, Vas: .0140Cuft., fo: 160Hz free air Impedance: 4 ohms Power: 40W Mirror Cabinet Specification Low energy and long-lasting LED white lighting (included) RGB Colour change LED waterproof light bar fitted to underneath of Cabinet. Remote control. Internal 240 volt shaver socket with integral on/off rocker switch. Shaver socket can be used with lights off. Self branded infra red sensor on/off sensor switch (bottom). Please allow 10cm from nearest obstacle e.g tap or sink. Crystal clear mirror (not tinted). The cabinet includes 2 adjustable glass shelves. Beautiful Highest Quality Aluminium Chassis Soft close Hinges with easy clip doors Fully adjustable shelf holders LED lighting for cabinet interior The cabinet has a 2mm bevelled edge. This cabinet needs to be connected to an earth wire. Gross weight 21.5Kg. Please ask a professional if you are not capable of fitting yourself. The cabinet is in accordance with IP44, CE and RoHS regulations