Arete synthetic-diamond tester by Gemtrue, 'Duo' model, includes a Diamond Experior tester

Summary Arete synthetic diamond tester plus a free DIAMOND EXPERIOR thermal diamond tester. The ARETE by GEMTRUE is an essential tool for the experienced jeweller and professional diamond dealer, it is for testing known diamonds, to see if they are natural or synthetic. It also detects Moissanite. Step 1. Test the stone on a standard 'thermal' diamond tester. You get one of these free with each Arete!  This will tell you if it's diamond or Moissanite (you won't know which) or if it's neither. If it's neither, no other test is required.   Step 2. If the standard thermal tester indicates "Diamond" then it's probably diamond but it might be one of the new Moissanites. Or if it is diamond, it might be natural or it might be synthetic* - so now test it on the Arete, this will tell you if: - you have a natural diamond - you have a synthetic diamond - it's Moissanite.  ** natural diamond and synthetic diamond are both real diamonds.  "Naturals" are grown in the ground by nature, "Synthetics" are made by man a laboratory.  Detail Natural diamonds grow as crystals deep in the Earth, they are brought nearer the surface through volcanic activity where they are mined (they are also known as as mined diamonds).  It takes 2 to 3 billion years for a diamond crystal to grown naturally.  Synthetic diamonds are grown by man in a laboratory over a period of a few weeks. "Synthetic" is the scientific term. Colloquially, we say lab-grown or manmade or lab-created.  It takes a few weeks grow a synthetic diamond in a laboratory.  Synthetics and naturals are identical, they are both diamond. They are the same chemically, they are the same optically. That is why it is so difficult to tell them apart, see our article about synthetic diamonds.   Features handheld and lightweight can test any stone mounted in jewellery (most brands are either for loose stones only, or can only test stones in small rings with open settings) also tests for Moissanite  fastest response time (test-result in 2 seconds) Although there's an instruction leaflet, there are also videos of the instructions on the actual display on on the tester Results displayed on the screen and, at the same time, confirmed by voice one year guarantee INCLUDED The Arete, synthetic-diamond tester A standard thermal diamond tester, model is Diamond Experior Rechargeable batteries and a battery charger Diamond gauge USB power cable (for use instead of batteries) Neat heavy-duty carrying pouch for the pocket and a larger case for storage Stone-holder for loose stones (you can also test stones mounted in jewellery) Polishing cloth (to clean the stone before the test) Operation 1) Clean the top (table) of the stone with the polishing cloth 2) Do not remove the cap. Turn it on, wait 5 seconds for it to warm up 3) Place the probe in the centre of the stone as instructed on the display and see the reading (details below). THE READINGS: CVD / HPHT / Type IIa diamond CVD/ HPHT are two are methods of growing diamond = synthetic Type IIa diamond is a very rare type of natural diamond that will show up as 'synthetic' on this tester. So if the tester shows, "CVD / HPHT / Type IIa Diamond" there is a good chance it's synthetic but this is not guaranteed. DIAMOND By "diamond" they mean natural diamond.  MOISSANITE Moissanite is not diamond (neither natural diamond nor synthetic diamond) but it is useful to be able to detect these because they show up as diamond on the standard  diamond testers.  You notice that there isn't a reading not diamond ("simulant"); if you are not a diamond dealer or experienced jeweller you must be certain you are testing a stone that has read 'diamond' or 'Moissanite' on a standard diamond tester.  Technical Size 192mm X 42mm X 21mm  Weight 76g  Tests* stones from 0.01 to 3 carats incl. mounted stones in any setting Tests* stones of colour D to J Tests* round (brilliant-cut) stones that are perfectly polished * It is important to understand what these limitations mean, see our guide to synthetic-diamond testing. RESPONSE TIME Start-up time 5 seconds Testing time 2 seconds POWER Power: four AAA batteries (supplied) or any USB power source (USB cable supplied) Battery life: 4 hours of testing Auto-power-off yes, if used on battery power it turns itself off after 10mns of non-activity. ACCURACY We don't have official figures but, typically, these give a correct results about 95% of the time providing the colour is 'clear' (colour D to J), and the size is at least 0.02ct, and the cut round ('brilliant') and perfectly-cut, and the stone is reasonably 'clean' - see below.  GUARANTEE 1 year Limitations, please read! The Arete is for distinguishing natural diamond from synthetic diamond, it will also detect Moissanite (because Moissanite gives misleading readings on standard diamond testers). The Arete is not for testing diamond v. non-diamond.  0.01% of natural diamonds have an unusual composition ("